Most of the vehicles arrive with a single OBD connector to link third-party apparatus to the on-board computer
But occasionally, you might choose to connect two devices to the exact same connector.
This is the area where OBD2 splitter extension wires come in handy. The OBD2 splitter cable lets you connect 2 OBD apparatus, like an electronic gauge and dashcam in precisely the exact same moment.
In this guide, we’ve recorded the best OBD2 splitters so you can connect multiple devices to your car easily.
- TOP 3 BEST VIBRATION SPEAKER
- TOP 4 BEST PHONE COOLER
- TOP 3 BEST KODI KEYBOARD
- Top 3 Best 4×6 Led Headlights Reviews
Top 5 Best OBD2 Splitter
- 100% Brand new and high quality, Ultra flat low profile, Easy to carry and use.
- High-quality materials give the cable superior flexibility and durability.
- Use OBD extension cable can save the wear and tear on your scan tool's OBD connector.
- Passes all 16 pins straight through. NO shared ground wires.
- OBD2 Y Cable
If you need longer cables to connect your own OBD apparatus, bbfly-B4 OBD II provides 1FT/30CM cables with 16 pin splitter expansion. The cable is constructed from high-quality substances for durability.
The cable moves 16 pins directly through without requiring common floor wires.
OBD2 splitters are exceptional accessories that enable you to connect multiple devices to your automobile concurrently.
But, some OBD2 splitters might not be compatible with the vehicles. Be certain that you check for your auto’s requirements prior to placing the order and do not forget to discuss your decision with us through the remarks section below.
- Ultra low profile design for hard to reach spots. Supports all standard OBD 2 protocols and 16-pin Pass-through for all OBD2 Vehicles.
- 50cm/20inch/1.6ft Length 1 Male 16 pin J-1962 and 3 x Female 16 pin J-1962 low profile extension connectors with Individually Power switch avoid battery drain and damage.
- Direct pass through on pins 2, 4, 5, 6, 7, 10, 14, 15, 16 ,Ideal for use with GPS trackers for the most discrete instalations.
- This OBD2 splitter Cable will allow you to split out one OBD II port into Three OBD II devices to the vehicle at the same time to save more room
- Revolutionary flat flexible design allows to route the cable where you need it
IKKEGOL OBD2 Diagnostic Extension Cable features a horizontal elastic layout for conveniently routing it into a favorite spot. You can save room by splitting one OBD II port into three OBD II devices to your car in precisely the same moment. The cable is suitable for use with GPS trackers in the most isolated installations.
The ultra-low profile design makes it simpler for the connector to get stains that are tough to reach. It’s possible to use the product on all 16-pin Pass-through and regular OBD two protocols for many OBD2 Vehicles. When purchased, it includes three female and one man 16-pin J-1962 low profile expansion connectors.
PROFESSIONAL GRADE SCAN TOOL: Transform your Windows PC, laptop, or tablet into a true automotive diagnostic apparatus (compatible with Apple iOS apparatus )
DIY VEHICLE DIAGNOSTICS: Save money and time by reading and clearing’check engine’ and problem codes and determine problems before consulting a mechanic
FREE FIRMWARE AND SOFTWARE UPGRADES: System includes OBDwiz diagnostics applications for simple to get charts, logs, and real-time engine information exports
MAXIMUM VEHICLE COVERAGE: Works on more vehicles than any other scan tool in the marketplace including all 1996+ automobiles and light trucks sold in the USA (except hybrid or electric vehicles)
SATISFACTION GUARANTEED: Your ScanTool is provided with a 90-day Money-back Guarantee if You’re unsatisfied for any reason, along with a 3-year fix or replace manufacturer guarantee
- flat ribbon obd 2 extension cable
- all 16pins connected one by one
- length : 30cm/1ft
- AWG: 26AWG . The normal cable is just 28awg or just 8pins , but our cable is full 16pins and 26awg .
- Super thin obd2 male to female
Here is an OBD2 extension cable for buyers on a budget. The Arteckin OBD2 flat ribbon cable is among the most economical parts of equipment you will ever purchase for your vehicle. While it does not have any bells and whistles, it is the cheapest way to find an OBD2 extension cable using independent pins.
This Arteckin cable is perfect if you’re looking for a cheap way to produce your OBD2 port more accessible. It does have some flaws, however. You will simply be able to hook one apparatus using this cable, to start with. The brief length can be limiting for many consumers. On the flip side, the angled connectors and horizontal ribbon layout make it effortless to connect.
OBD2 Extension Cable: 16 pin splitter cable, obd2 ultra horizontal, 60cm and 2ft obdii extension cable.
Permanent: Produced from high-quality materials, features flexibility, and endurance.
Simple to use: two in 1 male to female, simple to install and connect.
Compatibility: Getting all typical OBD2 protocols to encourage. Flat ribbon cable connectors 16-pin pass-through OBD2 Vehicles.
After-Sale Services: This thing from Gemwon, any query concerning our products, please contact us and we’ll assist you nicely.
Picking an OBD2 splitter one of numerous choices can be quite hard. In order to lessen the job, you should start looking for a few significant features in almost any version. In this manner, you will readily find the ideal product best suited to your own requirements. Below are a few important features that result in a fantastic OBD2 splitter.
Among the substantial features to search for is the elastic design of expansion wires. This allows you track them according to your selection. What’s more, it reduces the odds of any possible damages that a rigid wire may confront.
Once it comes to expansion wires, there are many brands in the marketplace. For this reason, you must decide on a version that’s created of heavy-duty cloth and capable of serving the client for quite a while frame. By way of instance, you may start looking for a long, flexible, and very low profile OBD2 splitter.
Not everyone is able to devote a great deal of money when making a buy. For this reason, you should think about your financial plan and choose a product which comes with the desirable features. Additionally, it ought to be offered at an inexpensive price.
This really is a prominent characteristic of OBD2 splitters. You always ought to catch such expansion wires that reveal compatibility with numerous OBD2 scanning applications in order to save the consumer from purchasing a particular cable for certain gear.
Many businesses provide a certain guarantee on their products. Because of this, it’s far better to select a splitter that’s backed by an impressive guarantee to conserve any extra cost in the long run.
As mentioned previously, OBD2 extension wires come in various designs, sizes and lengths to fit your vehicle or gear’s ODB2 analytical needs. Consider getting one that is compatible with most ODB2 scanning tools. The product also needs to be extended enough to let you conveniently connect it directly to your scanner.